beam power
英 [biːm ˈpaʊə(r)]
美 [biːm ˈpaʊər]
射束功率
双语例句
- I knew that for this project to work, I needed the right transducer, and a transmitter that needs to have this amount of power and be able to beam that power across the room and hit these targets, and so on.
我知道这个项目要想成功，必须要有正确的换能器，另外还得有一个能发射足够额度电能的发射机，等等。 - I needed to figure out which is the best transducer I can use that will beam power through the air.
我需要确定哪种换能器是我需要的，也就是能够通过空气传递能量。 - Down Disassembly of H3/ 36B Tower Crane by Self-Made Lifting Beam in Power Construction
电力建设中H3/36B塔吊自制吊梁的降节拆卸 - In some comics, wizards confront one another by means of sending a single beam of power against their opponents.
一些漫画故事里，巫师们通过互相朝对方发射能量光柱来进行战斗。 - The fiber-optic monitor network of neutral beam accelerator power is introduced in experimental advanced superconducting Tokamak ( EAST).
介绍了超导托克马克聚变实验装置中加速极电源系统的光纤监控网络； - This refers to the General Assembly, beam no power to monitor oversold behavior, only the sale of products, businesses discretion, to protect their own and the interests of consumers.
梁中本指大会无权监管超卖行为，惟有售卖产品的商家酌情处理，维护自己及消费者的权益。 - Since the photon shutter in the front end blocks all incident beam power, a thermal-stress analysis is vital in the design of the front end.
前端装置中的挡光器将阻挡全部的光束，所以挡光器的热-应力分析在前端区设计中是非常关键的。 - The results showed that if laser beam machine, focus system and material are determined, four major factors have influence on process quality. They are laser beam power, pulse duration, cutting velocity, gas pressure.
结果表明：在激光器、聚焦系统和材料确定后，激光功率、脉宽、切割速度、气体压力是影响加工质量的主要因素。 - It is shown that the transformation characteristics depend on optical beam power, the beam waist of incident beams, object distance and lens parameters.
结果表明，它的变换特性依赖于光功率、入射光束的束腰、物距以及透镜参数。 - With the beam power or power density increasing, the interdiffusion effect of filler metal and tube wall is enhanced, which obviously causes the transition layer to thicken thicker and the tube wall to thin thinner obviously.
随着电子束输入功率或功率密度增大，钎料和管壁的相互扩散作用增强，导致过渡层厚度增加，毛细管壁显著减薄； - This paper deals with the laser welding of diamond core drills and the effect of technical parameters such as the focus position, beam power density and welding speed on the welding strength.
研究了82，68两种金刚石取芯钻头的激光焊接方法及工艺，并分析了激光焊工艺参数对焊接质量的影响。 - The total neutral beam power of 130 kW was also obtained by integral calculation with the temperature rise on the heat section board.
同时通过对热量截止板冷却循环水温升测量值在时间上的积分数值计算，也获得了注入束流总功率，为130kW。 - Relation between beam power density distribution and temperature field
电子束焊功率密度分布与温度场关系的研究 - The precision control of the laser beam power was realized with neutral glass slices for CCD dynamic detecting range.
可采用中性玻璃衰减片组对激光光束的衰减进行精细控制，使其满足CCD探测器动态范围要求。 - The formulas of mode conversion are derived and effects of optical beam power, initial beam width radius and inverse of the radius of curvature of the wave front on the mode conversion are analysed.
导出模式变换公式，分析了光束功率、光束初始的束宽半径和波前曲率半径的倒数对模式变换的影响。 - The power distribution and accelerator beam power do not vary obviously.
在堆芯功率分布与加速器束流功率方面没有明显变化。 - In this paper, the laser welding technology of diamond saw blade is studied. Analysis is made on the effect of process parameters including the laser beam power, welding speed, focus position, assistant gas and beam alignment upon the welding quality.
本文研究了金刚石圆锯片的激光焊接技术，总结出焊接方法，分析了工艺参数（功率、速度、焦斑位置、辅助气体、光束偏移量等）对焊接质量的影响。 - The effects of beam power density, scanning velocity, temperature of substrates and the construction of samples on the quality of the monocrystalline silicon films were discussed.
本实验的重点在于摸索电子束的功率密度、扫描速度、衬底的温度和样品结构等因素对形成单晶硅薄膜质量的影响。 - Generally, the test device of the ion source is equipped with a calorimeter to measure ion beam power.
一般离子源实验台上通常配备有测量束功率的量热计。 - Measurement of neutral beam power and beam profile distribution on DNB
DNB引出束流功率及剖面分布测量 - A primary variable transformer system of the diagnostic neutral beam power with relay control
基于继电控制的中性束诊断电源初级调压系统 - General solution of its coupling mode equation is obtained and variation characteristics of beam power and phase are given under different incidence conditions. The results are compared with characteristics, which have been studied by many people, of that with equal waveguide core refractive index.
给出了不同入射条件下波导耦合引起的光场功率和相位的变化特性，并与通常理论研究的等芯层折射率的结果进行了比较。 - To measure the beam power and the distribution of beam power density, as an emphasis, a calorimeter is designed.
为了测量束功率和功率密度分布，设计了功率测量靶。 - Design of 120 MW beam power electron gun for high power klystron
120MW束流功率速调管电子枪设计 - Study on High Precision Laser Beam Power Stabilizer
高精度激光束功率稳定器的研究 - Exponential decay of six capturing beam power makes atoms further cooling according to Sub-Doppler cooling mechanism when atom are launched under timing control.
AOM使六束俘获光功率在Cs原子上抛同时，在时序控制下按照指数规律衰减，使Cs原子按照偏振冷却机制进一步冷却。 - The expression of impurity content in silicon as electron beam power and refinement time was derived as follows: The calculated value was consistent with the experimental value.
本文推导出了硅中各种杂质含量与电子束功率和精炼时间的关系表达式如下：试验验证表明理论计算值与实验值基本一致。